Crossing Core 2.0 | 2.1 Recycling Bubbler E-Rig Kit

$199.99$249.99
Core Model


Crossing Core 2.0 | 2.1 Recycling Bubbler E-Rig Kit

Model Choice: 2.0 or 2.1

The one you've been waiting for... Core 2.0 e-rig with a black silicone sleeve and carb tether, 4-port spinner carb cap and V5 Heater!! 
When heater housing design and art combines! Meet the new rebuildable ceramic coil for the Core 2.0 E-Rig. The RDA V5 Ceramic Heater works on the original Core also. The original Core coil atomizers work on the Core 2.0 too! 
 
There are a some key differences between the Core and Core 2.0 e-rigs which are as follows: 
 
Core 2.0 runs V5 heaters, no wire based coils 
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design 
Four heat settings are now all for the V5 heaters 
Fully rebuildable atomizers – no need to replace the whole housing, just the heater 
Decreased pre-heat time 
Increased session time 
Increased total run time (80 second full run time) 
Vortex airflow – included spinner carb cap 
“Unbreakable” aluminum carb cap replaces glass bubble carb 
Improved button function 
Upgraded Stainless Steel Carb Cap Tube 
 
 
Features 
 
One button functionality for ease of use 
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater 
Rebuildable atomizer 
Vortex Airflow – Aluminum spinner carb cap with carb cap tether 
Borosilicate Glass Bubbler 
Stainless Steel Carb Cap Tube 
Four carefully tuned heat settings 
Isolated Aluminum and Glass Vapor Pathway 
Low maintenance 
Approx. 1 hour 45 minute charging time 
3150mah Li-Ion Battery Pack. 
 
 
What’s Included 
 
Core 2.0|2.1 E-rig Base 
Core Recycling Perc Bubbler 
Factory Travel Glass Bubbler
Aluminum Spinner Carb Cap (based on our design) 
Carb Cap Tether (black) 
Silicone Base Cover/Sleeve (black) 
Atomizer with V5 heater installed 
Spare V5 Heater 
SS316 Dab Tool (based on our design) 
4 x Spare Atomizer Screws 
Screwdriver 
2 x Spare Carb Cap Tube O-rings 
1 x USB-C Charger
Cotton buds/Q-tips 
Alcohol wipes 
Carrying Case 
 
Button Functions 
 
Hold – Manual fire up to 60 seconds 
Two clicks – Activate session mode – One click to cancel 
Three Clicks – Change heat setting 
Four Click – Display power level – Red/Low – White/Medium – Green/Full 
Five Clicks – Lock or unlock Core 2.0 Base 
 
 
Sessions times and temperatures 
 
The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time. 
 
Blue – 12.5 second pre-heat – Approx. 400° 
Green – 13 second pre-heat – Approx. 425° 
White – 17.5 second pre-heat – Approx. 465° 
Red – 22.5 second pre-heat – Approx. 500° 
 
 
Setup 
 
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 

Place bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place. 

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base. 

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater. 
Select your desired heat setting (start low if you’re not sure). 

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.0 can be used! 
 
 
Methods of Use 
 
Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience. 
 
Load material into the heater 
Press the fire button twice to activate session mode 
When your concentrate starts to bubble begin using gently with the carb cap left off 
When the Core 2.0 base vibrates place the carb cap back on and continue your use as you normally would 
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session 
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after 
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible. 
 
Press the power button twice to activate session mode 
Load your material onto your dab tool – rice size 
Wait for the Core 2.0 base to vibrate indicating the session temperature has been reached 

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again! 

As with cold starts, follow up sessions will always run a little hotter. 
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired. 
 
Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 
 
 
 
Cleaning 
 
Wipe out heater with a Q-tip after each use 
Clean the area around the RDA heater weekly to stop residue building up 
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use 
Replace bubbler water daily 
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking. 
 
 
Safety Features 
 
Over-charge 
Over-discharge/Low battery 
Over-heat 
Low heater resistance 
Short-circuit 
No atomizer 
 
 
Certifications 
 
CE Certified 
ROHS Certified Materials 
FCC Certification 
FDA Approved Silicone 
UN 38.3 Certified Li-Ion Battery Pack. 
Warning Lights – When your Core 2.0 base flashes three times it’s trying to tell you something… 
 
Blue – Short-circuit warning 
Green – No atomizer warning 
White – Over-heat warning 
Red – Low battery warning 
 
Warranty information 
 
For all warranty claims please contact the store you purchased from. 
The Core 2.0 power base is covered by a one year manufacturer warranty against defects. 
The Core 2.0 carry case is covered by a one year manufacturer warranty against defects. 
The atomizer is covered by a one week manufacturer warranty against defects. 
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer. 

Customer Reviews

Based on 13 reviews
92%
(12)
8%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Jared Zatkowsky
Excellent purchase well worth the price

The recycling bubbler attachment makes for a very smooth dabbing experience. I've had the Core 2.0 for years, and am now on my 3rd base. The first one was accidentally destroyed with water by my own fault, so now I have two, just in case one needs recharging. I'm a snob.

Note: I remove the silicon base so it doesn't wobble on my desktop, which I have a keyboard on. The silicon base is nice, though.

All the pros outweigh my two cons:

1: The plastic ring around the button seemingly always breaks. I'm 3 for 3 so far. I'd love to get some replacements somehow.

2: the O-ring inside the bowl (that touches the stainless steel carbon carb cap tube) can become dry if you clean constantly with rubbing alcohol, as I do. It can become dislodged, and eventually need to be discarded if you don't lubricate it with some vegetable oil.

Overall, 4.8/5 stars. Great product for the price.

A
Antwon Shelby
Excellent Seller, Excellent Product

I LOVE this thing. It hits hard, and is easy to use/clean, and it arrived here super fast. Somethings to look out for is that if you tip it with the bubbler on with water in it, theres a chance a siphon will form (depending on how much you filled the bubbler) and drain water into the chamber. Just avoid tilting it around (regular bong rules honestly)

A
Anita Green
Nice buy, I like it alot

It works good I use it on green setting I hit the button twice let it heat then vibrate but then I turn it off and hit the button twice to heat again then I add the juice. I find this is the best temp, white was a little too high and green on its own a little too low

J
John s.
Core 2.1 rocks

I love the size of this in my hands! Good quality product. It feels very well made and works wonders! Great clouds even with tiny lil dabs. Definitely more efficient use of my wax! Thanks a lot.

b
brock fuller
This thing is a better buy than a PuffCo

That's right, I said it! This thing is the shit, love it already.